PRODUCT
Hudson #208 Finishing Oil • Hudson #210 Pure Linseed Oil
 
TYPE
Hudson Finishing Oil #208 and Hudson Pure Linseed Oil #210 are clear, high-gloss varnishes that have extraordinary resistance to heat, weather and abrasions. It is a superior decorative clear coating for interior woodworks.
 
USE
Enhances wood grain of interior paneling, doors, cabinets, shelves, and even exterior wooden surfaces like eaves.
 
SURFACE PREPARATION
All wood surfaces to be painted should be sanded to smooth finish, cleaned and dry. Use Hudson Natural Paste Woodfiller #202 to fill up open grains of wood if necessary. 
 
PAINTING SCHEDULE
New Wood : Apply 2 coats. For Stained Gloss Finish 1st coat - Centro Spirit Wood Stain 2nd & 3rd coat - Hudson Finishing Oil #208 or Hudson Pure Linseed Oil Old Wood : Old varnish film in good condition should be lightly sanded. Clean surface before applying Hudson Finishing Oil #208 or Hudson Pure Linseed Oil. If varnish films is to be replaced, remove old finish with Hudson Strip Ease #100 or Centro Paint & Varnish Remover, then proceed as in new wood application. 
 
REPAINTING WORK
Check construction defects and natural wear for proper repair. Remove all scaling, blistering, flaking and peeling-off paint on previously painted wood. Wood surfaces must be clean and dry prior to paint application. Apply 2 coats of Hudson Finishing Oils. 
 
APPLICATION
By brush or spray.
 
THINNING
Use Splash Paint Thinner 
 
SPREADING RATE
20-25 square meters per 4-liter per coat. 
 
DRYING TIME
Allow overnight before recoat wih light sanding in-between.
 
PACKAGING
4 & 1 liter cans.