PRODUCT:
Centro Plastic Varnish #02 Maple
Centro Plastic Varnish #07 Lt. Mahogany
Centro Plastic Varnish #05 Oak
Centro Plastic Varnish #10 Brown
Centro Plastic Varnish #09 Dark Mahogany
Centro Plastic Varnish #06 Dark Oak
Centro Plastic Varnish #04 Red
Centro Plastic Varnish #08 Mahogany
Centro Plastic Varnish #11 Walnut
Centro Plastic Varnish #01 Natural
Centro Plastic Varnish #03 Yellow Ochre
Centro Plastic Varnish #12 Dark Walnut
 
TYPE:
Centro Plastic Varnishes are gum copal based clear coats for wood finishes. They are available in various shades to bring out a clear and natural tone in new and old wood.
 
USE:
For economical, glossy protection on ratans, woodworks and other surfaces such as cabinets, furnitures, paneling, etc.
 
SURFACE PREPARATION:
Smoothen, clean and dry all wooden surfaces to be varnished. Uneven sanding of wood would cause rough surfaces to absorb excessive varnish giving an uneven appearance. Fill open grains with Hudson Natural Paste Wood Filler #202 by brushing it along the grain. Allow to set 15 to 30 minutes then rub off excess across the grain. Sand to a smooth finish and dust off.
 
VARNISHING:
Using brush or spray, allow varnish to penetrate into the wood for 20 minutes before re-coat. Thin coats will lighten varnish color, too much will darken color tone. If a lighter tone is desired, thin with Excell Lacquer Thinner.
 
THINNING:
Excel Lacquer Thinner
 
APPLICATION:
Brush or spray
 
SPREADING RATE:
15-20 sqm / 4L
 
DRYING TIME:
Allow to dry overnight.
 
PACKAGING:
350cc and 4 liter cans