PRODUCT
Hudson Epoxy Enamel 3100 White • Hudson Epoxy Enamel 3101 Clear • Hudson Epoxy Enamel 3190 Black • Hudson Epoxy Enamel 3130 Gray • Hudson Epoxy Enamel 3140 Blue •  Hudson Epoxy Coal Tar 3191 • Hudson Epoxy Enamel 3150 Green •  Hudson Epoxy Enamel 3170 Red • Hudson Epoxy Enamel 3102 Aluminum • Hudson Catalyst For Epoxy Enamel 2101 
 
TYPE
Hudson Epoxy Enamel is a two component polyamide epoxy system which achieves excellent hardness not found in other types of enamels. Its glossy finish is resistant to mild acid solutions, brines and other chemicals.
 
USE
Highly recommended for surfaces exposed to corrosion, mild chemicals and the atmosphere. This includes interior metal, wood and masonry surfaces where cleanliness is needed and chemical resistance is required. Only White Epoxy Enamel should be used for interiors of drinking water tanks. Chalking may develop when used on exterior surfaces.
 
SURFACE PREPARATION
Metal surfaces should be free from rust, oil, grease, dirt and other foreign matter. Wood should be sanded and dusted. Interior masonry should be treated with Hudson Masonry Neutralizer #44. All surfaces should be clean and dry prior to application of surface primers.
 
PAINTING SCHEDULE
For interior metal, wood and masonry: 1st coat : Hudson Epoxy Primer 2nd & 3rd coat : Hudson Epoxy Enamel (Sanding Needed In-Between Coats)
 
MIXING
This product is a two component system, composed of a paint base and a hardener. Mix 3 parts of base paint to 1 part of hardener by volume. Stir mixture thoroughly and allow to stand for 10 to 15 minutes. Mix only enough paint for 8 hours application. Excess mixture will gel within 24 hours.
 
REPAINTING WORK
Rust films on metal should be sanded, wire-brushed or removed with Hudson Rust Converter #5015. Defective paint on metal, wood and masonry should be scraped, cleaned and dried. Note : Hudson Epoxy Enamel must not be applied over alkyd enamels or alkyd primers. 
 
REPAINTING SCHEDULE
Base Metal, Masonry and Wood 1st coat : Hudson Epoxy Primer 2nd & 3rd coat : Hudson Epoxy Enamel Previously painted metal, wood or masonry in good condition. 2 coats of Hudson Epoxy Enamel. 
 
APPLICATION
By brush or spray. 
 
THINNING
Use Hudson Epoxy Reducer.
 
SPREADING RATE
20-30 square meters per 4-liters.
 
DRYING TIME
2-3 hrs., re-coat overnight. 
 
PACKAGING
Hudson Epoxy Enamel - 4 liter can, 3/4 full ; 1liter can, 3/4full. Hudson Curing Agent - 1 liter bottle, full; 1/4lt bottle. 
 
POT LIFE
24 hours.