PRODUCT:
(Interior) Hudson PU Wudgard #11-03 Clear Gloss, PU Catalyst AAA, Hudson PU Wudgard #11-04 Semi-Gloss, PU Catalyst AAA, Hudson PU Wudgard #11-05 Clear Flat, PU Catalyst AAA (Exterior) Hudson PU Wudgard #11-07 Clear Gloss, PU Catalyst CCC, Hudson PU Wudgard Colored Topcoats, PU Catalyst CCC 
 
TYPE:
Hudson PU Wudgard Clears & Colored Topcoats are two component high solid coatings with exceptional chemical and physical properties. When dry, it is odorless, non-toxic and extremely resistant to scratches and abrasions.
 
USE:
Interior & Exterior new wood such as panelling, fixtures, furniture, cabinets, door and shelves.
 
SURFACE PREP & APPLICATION:
Interior or Exterior wood surfaces to be painted must be free from dust, oil, grease, dirt, wax and other foreign matter. Bare wood should be applied with appropriate Hudson PU Wudgard Sanding Sealer. Mix Wudgard Clears or Topcoat to PU Catalyst at three to one (3:1) by volume respectively. Stir mixture thoroughly. Reduce to application consistency with PU Reducer 22020. Apply by brush or spray. At least two (2) coats are recommended. Air dry for at least one hour before sanding. Mix only enough material for two hours work. 
 
PAINTING SCHEDULE:
1st & 2nd coat: Hudson PU Wudgard Sealer and sand smooth before applying topcoat. Top coat : Hudson PU Wudgard Clears or Topcoat 
 
THINNING:
Hudson PU Reducer 22020 
 
APPLICATION:
By brush or spray. 
 
SPREADING RATE:
25-30 square meters per 4-liter per coat.
 
DRYING TIME:
Interior: 15 minutes touch-free. Recoat after 30 min. Exterior: 30 minutes touch-free. Recoat after 1 hour. 
 
PACKAGING:
4 liter & 1 liter set.
 
CAUTION:
Keep paint containers tightly closed at all time. Use only the recommended solvent for reduction. Clean equipment immediately after use with PU Reducer 22020. Work with standard protective equipment during application. Products are highly flammable. KEEP AWAY FROM OPEN FLAME AND HEAT.