PRODUCT:
Hudson TimberTint is a one component, ready to use and easy-to-apply waterbase stain system formulated as a stain for wood to be topcoated with Hudson Timbercoat Polyurethane Water- Based Wood Coating. It is recommended for interior and exterior wood furniture and woodworks.
 
USE:
As stain to be applied on interior and exterior wood furniture and woodworks. It can be applied on different wood species.
 
SUBSTRATES:
Designed to use on new bare wood or stripped wood surfaces such as cabinets, doors, floors, furniture, picture frames and woodworks.
 
SURFACE PREPARATION AND APPLICATIONS:
 
1. SANDING OF WOOD
Completely remove any old or existing paint/finishes from the surface using chemical stripper along with the scraper and sandpaper as needed. Always sand with the grain of the wood using fine grit sandpaper. If the surface is rough, start with medium grit and finish with fine grit. Wood surfaces should be sanded smooth. Before staining, remove all sanding dust and dirt by vacuuming and wipe with a clean water-dampened cloth. Do not use tack cloth.
 
2. APPLICATION OF STAIN or STAINING
Mix or shake the stain thoroughly before using. Always test color on a separate piece of wood before the actual wood to be use. Application of topcoat will also affect color. Apply the stain liberally with a nylon/polyester brush, foam brush, staining pad or rag. Allow the product to penetrate. While stain is still wet, wipe off the excess using a staining pad or a clean cloth. Use a rag or cloth lightly dampened with stain to even out the finish. If stain dries before wiping off, re-wet the surface with more stain and re-wipe. If a deep, richer color is desired, apply 2 to 3 more coats. Let it dry for 30-45 minutes before applying the topcoat, Hudson Timbercoat Polyurethane Water-Based Wood Coating Gloss, Semi-Gloss or Matte.
 
3. APPLICATION OF WATERBASED TOPCOAT CLEAR
Apply even coats of Hudson Timbercoat Polyurethane Water-Based Wood Coating Gloss, Semi-Gloss or Matte to get the desired finishes. (See the technical data of Hudson Timbercoat Polyurethane Water-Based Wood Coating for proper application procedure.
 
COVERAGE: 10 sqm / L 
 
DRYING TIME:  15-20 min
 
HEALTH AND SAFETY:
Ensure good ventilation during application and drying. Avoid breathing vapor and spray mist. Avoid contact with skin and eyes. Wear eye protection and gloves during application or sanding. Wash hands after using. DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN. In case of spillage, keep spectators away. Dike and contain spill with inert material (e.g. sand or soil). Keep spill and cleaning runoffs out of sewers and open bodies of water. Dispose contaminated material according to government regulations.
 
FIRST AID:
If overcome by vapor and spray mist, bring victim to fresh air. In case of eye contact, rinse immediately with plenty of water for at least 15 minutes. Obtain medical treatment immediately. In case of skin contact, wash thoroughly with soap and water. Remove contaminated clothing. Wash clothes before reuse. If swallowed, do not induce vomiting. If vomiting occurs spontaneously, keep head below hips to prevent aspiration of liquid into the lungs. Get medical help immediately.