TYPE
Centro #38 Linseed Oil is a clear, high-gloss varnish that has extraordinary resistance to heat, weather and abrasions. It is an economical decorative clear coating for interior woodworks.
 
USE
Enhances wood grain of interior panelling, doors, cabinets, shelves, and even exterior wooden surfaces like eaves.
 
SURFACE PREPARATION AND APPLICATION
All wood surfaces to be painted should be sanded to smooth finish, cleaned and dry. Use Centro Plastic Woodfiller to fill up open grains of wood if necessary. 
 
PAINTING SCHEDULE
New Wood : Apply 2 coats. For Stained Gloss Finish 1st coat - Centro Spirit Woodstain 2nd & 3rd coat - Centro Linseed Oil Old Wood : Old varnish film in good condition should be lightly sanded. Clean surface before applying Centro Linseed Oil. If varnish films should be replaced, remove old finish with Centro Paint & Varnish Remover, then proceed as in new wood. 
 
REPAINTING WORK
Check construction defects and natural wear for proper repair. Remove all scaling, blistering, flaking and peeling-off paint on previously painted wood. Wood surfaces must be clean and dry prior to paint application. Apply 2 coats of Centro Linseed Oil.
 
APPLICATION
By brush or spray.
 
THINNING
Use Splash thinner.
 
SPREADING RATE
15-20 square meters per 4-liter per coat. 
 
DRYING TIME
Allow overnight before re-coat with light sanding in-between.
 
PACKAGING
4 & 1 liter cans. 
 
CAUTION
Toxic and flammable. Keep away from fire and reach of children.