Adhesives and Sealants

Automotive Paints

Polyurethane

Epoxy

Acrylic

Architectural Paints and Coatings

Hudson

Olympic

Centro

Cleaners and Disinfectants

Consumables

Special Products

back
  1. Products
  2. Adhesives and Sealants
  3. Sealants
  4. SHELBY RUBBERIZED LIQUID ASPHALT
TYPE: 
Shelby #16 Rubberized Liquid Asphalt is a paste like emulsified rubber asphalt sealing compound. When dry, it forms an impervious and highly elastic seamless sealing film, highly resistant to heat and cold.
 
USE:
Shelby Rubberized Liquid Asphalt is applied on: • Rain and Water Exposed Surfaces - roof-sealing, roof repairs, terraces, balconies, underground garages. • Rising Moisture Areas - Cellars, floor slabs. • Ground Moisture, Meteoric and impounded water - foundations and cellar walls.
 
SURFACE PREPARATION & APPLICATION:
All surfaces must be clean free from dirt, oil and grease. A diluted solution of Rubberized Liquid Asphalt with clean water at a ratio of 1:1 is highly recommended as primer coat in order to achieve an adequate adhesion to the surface. It should not be applied in rain and to building elements where capillary moistures do continually enter the coating from the sub-surface. Apply at a thickness of 90 to 100 mils equivalent to 3-4 coats. The residual water of the preceding coat must have evaporated before the next coat is applied. It is recommended during application that all the working equipment is to be moistened with water before use and to be rinsed from time to time in order to prevent the compound from setting. 
 
SPECIFICATIONS:
Base : Bitumen Emulsion / Synthetic Rubber Latex • Solid Content : 63 % max. • Consistency : Brushable • U.V. Stability : Good • Chem. Stability : Resistant to all chemical action normally occurring in building structures. • Drying Time : 4-1/2 hours after application • Thermal Stability : 100-120 ºC • Water Imperviousness: Water Proof 
 
THINNING:
Use Clean Water. 
 
SPREADING RATE:
10 square meter / 4-liter / coat.
 
PACKAGING:
4 liter can.